ANKER Glass Cleaner, glass and plastic cleaner, 500 ml
GLASS CLEANER is a highly effective cleaner for glass and plastics with an antistatic effect. It perfectly removes grease and other stubborn dirt. It evaporates quickly and leaves no streaks! The product creates an ultra-thin antistatic layer on the treated surface, which protects the material from dirt and other adverse effects.
GLASS CLEANER highly effective glass and plastic cleaner with antistatic effect. It perfectly removes grease and other stubborn dirt. It evaporates quickly and leaves no streaks! The preparation creates an ultra-thin antistatic layer on the treated surface, which protects the material from dirt and other adverse effects.
GLASS CLEANER is suitable for cleaning and subsequent protection of e.g.: phones, tablets, PC monitors, TVs, mirrors, glass products, protective plexiglass shields, glasses, crystal, ceramic and stainless steel materials, lacquered surfaces and other hard smooth surfaces. The preparation perfectly cleans the surface and subsequently creates a protective shield preventing the accumulation of dirt.
Approximate yield: 100 ml / m 2 (consumption of the product also depends on the degree of pollution and the method of application)
Preparation before application: to achieve the desired results, it is necessary to follow the prescribed application procedure. Apply at a temperature of 15 to 30 °C. It is not suitable to apply the product to surfaces heated by sunlight and other heat sources.
Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.
THE PREPARATION IS READY FOR DIRECT USE!
Method of application: use protective equipment when applying. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.
- Apply the cleaning solution using a sprayer directly on the surface or on a cloth.
2. If necessary, repeat the procedure.
Subsequent surface protection with ANKER CARE products
We recommend combining the cleaned substrate with NANO surface protection , on which an ultra-thin hydrophobic layer is formed after application with protection against subsequent oil and grease contamination, ensuring a reduction in the subsequent deposition of coatings and dirt.
Nano applications for subsequent use:
NanoOne - Nano hybrid impregnation of glass, ceramics, plastic and metal
Storage: Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost.
Marking in accordance with EU Regulation no. 1272/2008
DANGER: Flammable liquid and vapors. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Ground and secure the packaging and sampling equipment. In case of fire: Use dry powder extinguisher/sand/carbon dioxide to extinguish. Store in a well-ventilated place. Keep refrigerated. Dispose of the contents/packaging by handing it over to an authorized person for waste management or returning it to the supplier. Contains: < 5% non-ionic surfactant
Disclaimer: The information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions
| Category: | Chemistry - cleaning and maintenance |
|---|---|
| EAN: | 8594179531936 |
Be the first who will post an article to this item!
