Laing Circulation pump E10 Fixed Speed - 65W, 1" Barb
Code: E10-NSHNDNN2W-08Related products
Product detailed description
New budget model E10 uses about 40% less energy than previous models. It contains intelligent „chip“ in engine which gradualy raises rotation per minute after turning on in order to limit cavitation of rotation wheel and ensure free start-up „Air lock“
Laing pumps can be found on whirpools by the brand Sundance and Jacuzzi.
Function E10
- In-built protection DRY RUN helps to eliminate damage if pumps run without water.
- Quiet operation. Pump offers lower overall level than traditional induction pumps.
- Construction of ball rotor does not require any shaft sealing which means no leakage!
- Engine provides the same operation with output of 60Hz or 50Hz
- Less lighter than ordinary pumps
Engine information
- Type: 24h circulation pump
- Nominal HP: 0.08hp, 65W
- RPM: 4000
- Connection intake/discharge: 1" without thread
2× flange not included
Additional parameters
| Category: | Cirkulační čerpadla Laing |
|---|---|
| Weight: | 10 kg |
| Brand: | LAING |
| Type of pump: | Circulation |
| Output: | Less than 0.5kW |
| Hose inlet: | Less than 48 mm |
| Hose outlet: | Less than 48 mm |
| Model: | Laing Circ pump E10 1" Barb |
| Maximální výtlačná výška: | 6,5 m |
| Rozměry: | 152 x 140 x 152 mm |
| Izolační třída: | F |
| Krytí: | IPX5 |
| Maximální průtok: | 10g/ min |
| Napětí: | 220-240V/ 50 Hz |
Be the first who will post an article to this item!
Add a comment