Loosens biofilm
Helps clean internal pipework and hidden areas that regular maintenance cannot reach.
Professional concentrate for deep cleaning hot tubs, massage bathtubs, pipes, and filters. Cost-effective 5 l package for professional and repeated use.
Large 5 L pack of deep cleaner for regular care of hot tubs, swim spas, bathing barrels, pipework, jets and cartridge filters. Helps loosen biofilm, grease, cosmetics and limescale from hidden parts of the system.
The 5 L canister is suitable for larger hot tubs and swim spas, wellness facilities, service companies or households with multiple water features.
Helps clean internal pipework and hidden areas that regular maintenance cannot reach.
Dissolves body oils, cosmetics, sunscreen and other greasy residues.
Lactic acid helps remove limescale and mineral deposits.
A convenient supply for regular deep cleaning and professional use.
Important: Only use Deep Cleaner in old water before it is drained. Do not enter the hot tub during the cleaning cycle.
| Water volume | Regular cleaning | Intensive cleaning | Number of cycles per 5 L pack |
|---|---|---|---|
| 0,5 m³ | 125 ml | 250 ml | approx. 40 regular / 20 intensive cycles |
| 1 m³ | 250 ml | 500 ml | approx. 20 regular / 10 intensive cycles |
| 1,5 m³ | 375 ml | 750 ml | approx. 13 regular / 6 intensive cycles |
| 2 m³ | 500 ml | 1 000 ml | approx. 10 regular / 5 intensive cycles |
| 5 m³ | 1 250 ml | 2 500 ml | approx. 4 regular / 2 intensive cycles |
| Cartridge filter | 50 ml / 5 l vody | Soak for 2–4 hours | approx. 100 cleaning solutions |
Clean immediately before the planned water change. Remove the cartridge filter if one is installed.
Use 250 ml per 1 m³ for regular cleaning or 500 ml per 1 m³ for heavy contamination.
Run all massage jets for 30–60 minutes. Keep the thermal cover open throughout.
After the cycle, allow the water to stand briefly and then drain it completely.
Rinse the inside with clean water to remove loosened dirt and foam residue.
After filling with fresh water, run the jets for 10 minutes. Repeat the cleaning cycle if a brown film or foam appears.
Recurring foam may indicate grease, cosmetics or dirt inside the pipework.
An odour after starting the jets may be caused by biofilm and organic deposits.
Brown discolouration of the foam or surface may indicate that biofilm is still being released from the pipework.
Biofilm can shield contaminants and increase the consumption of routine water-care products.
Recommended frequency: perform deep cleaning at every water change, at least once every 2–3 months.
| Name | ROYAL POOL & SPA DEEP CLEANER |
| Kategorie | Deep cleaner for hot tubs, spas, pipework and filters |
| Packaging | 5 L HDPE canister with cap |
| SKU / EAN | RP14050 / 8594233820228 |
| Hmotnost | 5,2 kg |
| Regular cleaning | 250 ml / 1 m³ vody |
| Intensive cleaning | 500 ml / 1 m³ vody |
| Cycle duration | 30–60 minutes with circulation and jets running |
| Recommended temperature | 30–35 °C for easier cleaning |
| Filter cleaning | 50 ml per 5 L of lukewarm water, soak for 2–4 hours |
| Storage | In the original sealed container in a cool, dry and well-ventilated place at +5 to +30 °C |
| Shelf life | 36 months from the date of manufacture stated on the packaging |
| Manufacturer | Royal Pure s.r.o., Výpravní 751/20, 619 00 Brno |
| Category: | Cleaning and maintenance |
|---|---|
| EAN: | 8594233820228 |
| Dávkování: | 250 ml |
Be the first who will post an article to this item!
| Manufacturing company : | Royal Pure s.r.o. |
|---|---|
| Address : | Výpravní 751/20, 619 00 Brno, Česká republika |
| E-mail : | info@royal-pure.cz |