ROYAL POOL & SPA HARDNESS CONTROL - 1 l
Product for regulating water hardness in pools and hot tubs. Maintains the optimal value of 100-250 mg/l for the proper function of chlorine-free systems.
Protection of water and equipment against deposits
Liquid water-hardness stabiliser and metal neutraliser. Binds calcium, magnesium, iron and manganese, reducing limescale, water discolouration and fouling of pool equipment.
Hardness and metals under control
Hard or well water can cause white deposits, rough surfaces, coloured cloudiness and gradual fouling of pipework, filtration and heating.
Binds calcium and magnesium
Reduces calcium deposits on walls, in pipework and jets, and on heating elements.
Neutralises metals
Helps bind iron and manganese, which can cause brown, green or yellow water discolouration.
Protects equipment
Reduces fouling of filtration, pumps, pipework, heating and sensitive heat exchangers.
Prepares fresh water
Stabilises mineral composition before subsequent pH and alkalinity adjustment and disinfection.
Dose according to measured hardness
Optimum water hardness is 100–250 mg/l. After filling or topping up, first measure the current value.
For measured water hardness in the range 125–250 mg/l.
For measured water hardness in the range 250–375 mg/l.
For hardness above 375 mg/l or significantly discoloured well water.
How much product will you need?
Approximate usage of a 1 L pack according to water volume and measured hardness.
| Water volume | 125–250 mg/l | 250–375 mg/l | Above 375 mg/L | Coverage of a 1 L pack |
|---|---|---|---|---|
| 0,5 m³ | 15 ml | 30 ml | 45 ml | Approx. 66 / 33 / 22 applications |
| 1 m³ | 30 ml | 60 ml | 90 ml | Approx. 33 / 16 / 11 applications |
| 1,5 m³ | 45 ml | 90 ml | 135 ml | Approx. 22 / 11 / 7 applications |
| 5 m³ | 150 ml | 300 ml | 450 ml | Approx. 6 / 3 / 2 applications |
| 10 m³ | 300 ml | 600 ml | 900 ml | Approx. 3 / 1 / 1 applications |
| 20 m³ | 600 ml | 1 200 ml | 1 800 ml | Approx. 1 application for moderately hard water |
Correct application step by step
The concentrate must always be diluted with water in a separate plastic container before application.
Measure the hardness
After filling or topping up, measure the water hardness. The optimum value is 100–250 mg/L.
Determine the correct dose
According to measured hardness, use 30, 60 or 90 ml per 1 m³ of water.
Dilute the product
First dilute the measured amount in a plastic container of water. Do not pour the concentrate directly into the pool.
Apply with filtration running
Pour the prepared solution into the skimmer or distribute it evenly along the edge with filtration running.
Filter for 6–8 hours
Run filtration continuously for at least 6–8 hours. Temporary milky cloudiness is a normal reaction.
Check the water
After 24–48 hours, take a control measurement and then adjust the pH to 6.8–7.2.
From hard water to metal discolouration
Typical problems
- Hard water after refilling
- White calcium deposits
- Brown, green or yellow water
- Well water containing metals
- Fouling of filtration and equipment
- Limescale in the hot tub
Suitable uses
- Family and public pools
- Inflatable and acrylic hot tubs
- Bathing barrels and Nordic tubs
- Swim spas and plunge pools
- Hotel pools and wellness facilities
- Fresh, salt and well water
Product specifications
| Product name | ROYAL POOL & SPA HARDNESS CONTROL |
| Category | Water-hardness stabiliser / metal neutralisation |
| Variant | 1 l |
| Packaging | HDPE bottle with cap |
| Product code | RP11010 |
| EAN | 8594233820174 |
| Hmotnost | 1,1 kg |
| Active ingredient | Tetrasodium ethylenediaminetetraacetate |
| Optimum water hardness | 100–250 mg/l |
| Shelf life | 36 months from the date of manufacture |
| Storage temperature | +5 to +30 °C |
| Country of manufacture | Czech Republic |
| Manufacturer | Royal Pure s.r.o., Výpravní 751/20, 619 00 Brno |
DANGER
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H373: May cause damage to organs through prolonged or repeated exposure.
- Wear protective gloves, protective clothing and eye or face protection.
- If in eyes, rinse cautiously with water for several minutes and call a doctor immediately.
- Never add the concentrate directly to the water without prior dilution.
- Do not use clarifiers or Flocculant for at least one week after application. The exception is well water, where Flocculant may be used after 48 hours.
- Keep out of reach of children and protect from frost and direct sunlight.
- UFI: SV00-V0EC-700W-EFS6
| Category: | Chemistry - cleaning and maintenance |
|---|---|
| EAN: | 8594233820174 |
| Dávkování: | 60 ml |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | Royal Pure s.r.o. |
|---|---|
| Address : | Výpravní 751/20, 619 00 Brno, Česká republika |
| E-mail : | info@royal-pure.cz |
