ROYAL POOL & SPA FLOCCULANT - 1 l
Liquid flocculant for quickly clarifying cloudy pool water. It binds fine impurities into flakes that can be captured by the filter.
Crystal-clear water without fine cloudiness
Liquid flocculant that binds microscopic contaminants into larger flakes. These are then captured by filtration or can be easily vacuumed from the pool floor.
Cleaner water in four steps
The product helps remove contaminants so fine that standard filtration cannot capture them on its own.
Captures fine particles
Acts on microscopic contaminants that make the water look milky or dull.
Forms larger flakes
Small particles combine into larger clusters that filtration can easily handle.
Settles contaminants on the floor
During intensive flocculation, the flakes settle on the floor and can be vacuumed away.
Restores the water's sparkle
Correct application helps restore a transparent, crystal-clear appearance.
Amount according to water condition
Before application, adjust the pH to 6,8–7,2. Choose the dose according to the water volume and current degree of cloudiness.
Apply approximately once every 10 days or according to current water quality.
For visibly cloudy water that standard filtration cannot clear.
Intensive dose for heavily cloudy water, followed by vacuuming the settled flakes.
How much product will you need?
Approximate usage of a 1 L pack according to water volume and selected treatment intensity.
| Water volume | Prevention | Mild cloudiness | Severe cloudiness | Number of preventive doses |
|---|---|---|---|---|
| 1 m³ – hot tub | 5 ml | 10 ml | According to water condition | Approximately 200 |
| 5 m³ | 25 ml | 50 ml | 75 ml | Approximately 40 |
| 10 m³ | 50 ml | 100 ml | 150 ml | Approximately 20 |
| 20 m³ | 100 ml | 200 ml | 300 ml | Approximately 10 |
| 30 m³ | 150 ml | 300 ml | 450 ml | Approximately 6 |
Correct application step by step
For maximum effectiveness, observe the correct pH, circulation time and method of removing the formed flakes.
Check the pH
Test the water and adjust the pH to the optimum range of 6.8–7.2.
Choose the correct dose
Choose the amount of product according to the water volume and degree of cloudiness.
Add to the water
With circulation running, pour the product evenly along the pool edge or into the skimmer.
Allow the water to circulate
Run filtration or circulation for 30–60 minutes. Switch off the massage jets in a hot tub.
Allow the flakes to settle
For intensive flocculation, switch off filtration and leave the water undisturbed overnight, ideally for 8–12 hours.
Vacuum the deposits
Slowly vacuum the flakes from the floor directly to waste, not back through filtration.
For pools, hot tubs and wellness facilities
Where can the flocculant be used?
Versatile product for home and professional water facilities.
- Family and public pools
- Inflatable and acrylic hot tubs
- Bathing and plunge barrels
- Nordic tubs a swim spa
- Hotel and wellness facilities
Which disinfectants is it compatible with?
The product can be used with both chlorine and chlorine-free water care.
- Chlorine systems
- Chlorine-free systems
- Active oxygen
- QAC-based disinfection
- Does not affect pH, alkalinity or water hardness
Product specifications
| Product name | ROYAL POOL & SPA FLOCULANT |
| Category | Flocculant for pools and hot tubs |
| Pack size | 1 l |
| Packaging | HDPE bottle with cap |
| Product number | RP12010 |
| EAN | 8594233820181 |
| Weight | 1,1 kg |
| Shelf life | 36 months |
| Bathing after application | After 2 hours |
| Manufacturer | Royal Pure s.r.o., Výpravní 751/20, 619 00 Brno |
Important notice
- Do not exceed the recommended dosage. Overdosing may cause milky cloudiness.
- Never mix the concentrate with other chemicals in the same container.
- For intensive treatment, vacuum settled flakes directly to waste, not through filtration.
- Store in the original sealed container in a cool, dry place at +5 to +30 °C.
- Protect from frost and direct sunlight and keep out of reach of children.
- Always read the label and product information before use.
| Category: | Water quality adjustment |
|---|---|
| EAN: | 8594233820181 |
| Dávkování: | 5 ml |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | Royal Pure s.r.o. |
|---|---|
| Address : | Výpravní 751/20, 619 00 Brno, Česká republika |
| E-mail : | info@royal-pure.cz |
