ROYAL POOL & SPA FLOCCULANT - 20 l
Liquid flocculant for quickly clarifying cloudy pool water. It binds fine impurities into flakes that can be captured by the filter.
Professional solution for cloudy water
Large-volume liquid flocculant for regular maintenance of large pools, wellness centres and public facilities. Binds fine contaminants into flakes captured by filtration or vacuumed from the floor.
Clear water even under high load
Microscopic cosmetic residues, minerals, dust, organic contaminants and dead algae may remain in the water even when filtration is working correctly. Floculant binds them into removable flakes.
Particle binding
Binds microscopic contaminants that are too fine for standard filtration.
Easier filtration
Larger flakes are continuously captured by sand or cartridge filtration.
Intensive clarification
For severe cloudiness, allow the flakes to settle and then vacuum them directly to waste.
Gentle formula
The product contains no chlorine, does not foam and does not affect pH, alkalinity or water hardness.
Amount according to cloudiness intensity
Always test and adjust the water pH before application to 6,8–7,2.
Apply once every 10 days or according to current water quality and operational load.
For visibly dull or milky-cloudy water that filtration alone cannot clarify.
Intensive treatment followed by settling and vacuuming the formed flakes.
Coverage of a 20 L canister
The large pack reduces frequent repurchasing and provides a convenient operational supply.
| Water volume | Prevention | Mild cloudiness | Severe cloudiness | Coverage of 20 L |
|---|---|---|---|---|
| 10 m³ | 50 ml | 100 ml | 150 ml | Approx. 400 preventive applications |
| 20 m³ | 100 ml | 200 ml | 300 ml | Approx. 200 preventive applications |
| 30 m³ | 150 ml | 300 ml | 450 ml | Approx. 133 preventive applications |
| 50 m³ | 250 ml | 500 ml | 750 ml | Approx. 80 preventive applications |
| 100 m³ | 500 ml | 1 000 ml | 1 500 ml | Approx. 40 preventive applications |
| 200 m³ | 1 000 ml | 2 000 ml | 3 000 ml | Approx. 20 preventive applications |
Correct application step by step
Check the pH
Test the water and adjust the pH to the optimum range of 6.8–7.2.
Calculate the dose
Determine the required amount according to water volume and current cloudiness intensity.
Add to the water
With circulation running, pour the product along the pool edge, into the skimmer or use a dosing system.
Mix the water
Run filtration or circulation for 30–60 minutes to distribute the product evenly.
Allow the flakes to settle
For intensive flocculation, switch off filtration and leave the water undisturbed for 8–12 hours.
Vacuum the flakes
Slowly vacuum the settled flakes from the floor directly to waste, not back through filtration.
Large pools and professional facilities
Typical uses
- Large private and public pools
- Hotel pools and hot tubs
- Wellness and spa centres
- Swim spas and bathing barrels
- Sauna plunge pools
- Facilities with regular or high consumption
Compatibility
- Chlorine and chlorine-free systems
- Active oxygen and QAC disinfection
- Fresh and salt water
- Hard and soft water
- Sand and cartridge filtration
- Manual and automatic dosing
Product specifications
| Product name | ROYAL POOL & SPA FLOCULANT |
| Category | Flocculant |
| Variant | 20 l |
| Packaging | Professional HDPE canister with cap |
| Product code | RP12200 |
| Optimum pH | 6,8–7,2 |
| Bathing after application | After 2 hours |
| Shelf life | 36 months from the date of manufacture |
| Storage temperature | +5 to +30 °C |
| Country of manufacture | Czech Republic |
| Manufacturer | Royal Pure s.r.o., Výpravní 751/20, 619 00 Brno |
Important notice
- Do not exceed the recommended dosage. Overdosing may cause milky cloudiness.
- Never mix the concentrate with other chemicals in the same container.
- During intensive flocculation, vacuum deposits directly to waste, not through filtration.
- Store in the original sealed container in a cool, dry and well-ventilated place.
- Protect from frost and direct sunlight. Keep out of reach of children.
- EUH210: Safety data sheet available on request. Read the information on the packaging before use.
| Category: | Water quality adjustment |
|---|---|
| EAN: | 8594233820631 |
| davka1: | 10 ml |
| davka2: | 15 ml |
| Dávkování: | 5 ml |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | Royal Pure s.r.o. |
|---|---|
| Address : | Výpravní 751/20, 619 00 Brno, Česká republika |
| E-mail : | info@royal-pure.cz |
